Author |
Message |
DenverCZBob
|
Post subject: Blue Guns Posted: Thu Jun 14, 2007 10:05 am |
|
Joined: Wed May 09, 2007 12:50 pm Posts: 40 Location: Denver, CO
|
If I were to buy my first Blue Gun to make holsters, which one should I get in order to hit the biggest holster market?
Thanks,
-bob
|
|
|
|
|
Greg
|
Post subject: Posted: Thu Jun 14, 2007 10:18 am |
|
Forum Moderator |
|
Joined: Wed Aug 24, 2005 9:13 pm Posts: 874 Location: Minneapolis
|
Smith & Wesson 642 and Keltec P3AT
|
|
|
|
|
joelr
|
Post subject: Re: Blue Guns Posted: Thu Jun 14, 2007 10:34 am |
|
The Man |
|
Joined: Sun Aug 07, 2005 5:43 am Posts: 7970 Location: Minneapolis MN
|
DenverCZBob wrote: If I were to buy my first Blue Gun to make holsters, which one should I get in order to hit the biggest holster market?
Thanks,
-bob Greg's right -- with a high priority on the J-Frame
_________________ Just a guy.
|
|
|
|
|
Srigs
|
Post subject: Posted: Thu Jun 14, 2007 11:07 am |
|
Longtime Regular |
|
Joined: Fri Aug 26, 2005 5:40 am Posts: 3752 Location: East Suburbs
|
My major sellers are J-frame, 1911, G19, G26, Kel-tecs and 3.5" Compact Smiths.
_________________ Srigs
Side Guard Holsters
"If everyone is thinking alike, then somebody isn't thinking" - George S. Patton
|
|
|
|
|
plblark
|
Post subject: Posted: Thu Jun 14, 2007 11:11 am |
|
Longtime Regular |
|
Joined: Thu Mar 16, 2006 10:41 am Posts: 4468
|
Srigs wrote: My major sellers are J-frame, 1911, G19, G26, Kel-tecs and 3.5" Compact Smiths.
also look at which blue guns are interchangable.
Like G26/27, G17/19/? and etc.
You might try forums for holster interchangability or go to the local holster shop and check the Models it fits listing.
|
|
|
|
|
DenverCZBob
|
Post subject: Posted: Thu Jun 14, 2007 11:37 am |
|
Joined: Wed May 09, 2007 12:50 pm Posts: 40 Location: Denver, CO
|
Thanks Guys!
I already own a KT-P3AT, so that's one less of the dozens that I will eventually need
Thanks again for such a great forum!
-bob
|
|
|
|
|
tullibee
|
Post subject: Posted: Thu Jun 14, 2007 2:15 pm |
|
Senior Member |
|
Joined: Thu Aug 11, 2005 1:49 pm Posts: 282 Location: Brooklyn Center
|
while we're on the subject -- can anybody explain why blue guns are so expensive? doesn't seem to me that they should be more than a few dollars -- take actual weapon, cast a mould out of it, use mould to make plastic replicas -- why so much $ ???
if I had access to the metal shop from high school, I could make an aluminum replica in shortly more time than it takes to heat up the small foundry oven to melt a lawn chair! (OK, it might not be the nicest finish, but it would probably work for many applications...)
_________________ what part of "shall not be infringed" is so hard to understand by so many people?
gun control means hitting where you aim!
|
|
|
|
|
Andrew Rothman
|
Post subject: Posted: Thu Jun 14, 2007 2:33 pm |
|
Longtime Regular |
|
Joined: Sun Aug 07, 2005 10:24 am Posts: 6767 Location: Twin Cities
|
Market forces. They don't sell very many, and there are only two major manufacturers that I know of.
If you set up a company and made accurate plastic replicas ("green guns") and sold them for $10, you'd pick up a lot of the business.
So get cracking!
tullibee wrote: while we're on the subject -- can anybody explain why blue bunnys are so expensive? doesn't seem to me that they should be more than a few dollars -- take actual weapon, cast a mould out of it, use mould to make plastic replicas -- why so much $ ???
if I had access to the metal shop from high school, I could make an aluminum replica in shortly more time than it takes to heat up the small foundry oven to melt a lawn chair! (OK, it might not be the nicest finish, but it would probably work for many applications...)
_________________ * NRA, UT, MADFI certified Minnesota Permit to Carry instructor, and one of 66,513 law-abiding permit holders. Read my blog.
|
|
|
|
|
cobb
|
Post subject: Posted: Thu Jun 14, 2007 3:02 pm |
|
1911 tainted |
|
Joined: Sun Aug 07, 2005 2:47 pm Posts: 3045
|
Srigs wrote: My major sellers are J-frame, 1911, G19, G26, Kel-tecs and 3.5" Compact Smiths.
And one Rohrbaugh?
|
|
|
|
|
MNBud
|
Post subject: Posted: Thu Jun 14, 2007 5:11 pm |
|
Longtime Regular |
|
Joined: Wed Sep 21, 2005 4:01 am Posts: 586 Location: west suburb
|
I'd give some thought to the Springfield XD line.
_________________ Just because you know your paranoid doesn't mean somebody's not out to get you.
|
|
|
|
|
rtk
|
Post subject: Posted: Thu Jun 14, 2007 5:35 pm |
|
Joined: Mon Jun 26, 2006 4:45 pm Posts: 353 Location: Minnetonka
|
Nope, I'm thinking the G19.......Maybe a real nice IWB job that RTK could use as an advertising piece for you
RTK( Who isn't usally that selfcentered)
|
|
|
|
|
DenverCZBob
|
Post subject: Posted: Thu Jun 14, 2007 6:53 pm |
|
Joined: Wed May 09, 2007 12:50 pm Posts: 40 Location: Denver, CO
|
rtk wrote: Nope, I'm thinking the G19.......Maybe a real nice IWB job that RTK could use as an advertising piece for you RTK( Who isn't usally that selfcentered)
Haha, You guys think like I do!
-bob
|
|
|
|
|
Srigs
|
Post subject: Posted: Sun Jun 17, 2007 1:47 pm |
|
Longtime Regular |
|
Joined: Fri Aug 26, 2005 5:40 am Posts: 3752 Location: East Suburbs
|
cobb wrote: Srigs wrote: My major sellers are J-frame, 1911, G19, G26, Kel-tecs and 3.5" Compact Smiths. And one Rohrbaugh?
Only one holster so far!
_________________ Srigs
Side Guard Holsters
"If everyone is thinking alike, then somebody isn't thinking" - George S. Patton
|
|
|
|
|
tullibee
|
Post subject: Posted: Tue Jun 19, 2007 2:16 pm |
|
Senior Member |
|
Joined: Thu Aug 11, 2005 1:49 pm Posts: 282 Location: Brooklyn Center
|
hmmm - if I incorporated and started such a company, and had to buy original weapons to create moulds - then could I write-off those costs as business expenses? or maybe the manufacturers would give me samples (or at least give cheap deals)... maybe this isn't a bad idea... (what's a smilie for nudge nudge?)
Andrew Rothman wrote: Market forces. They don't sell very many, and there are only two major manufacturers that I know of. If you set up a company and made accurate plastic replicas ("green guns") and sold them for $10, you'd pick up a lot of the business. So get cracking! tullibee wrote: while we're on the subject -- can anybody explain why blue bunnys are so expensive? doesn't seem to me that they should be more than a few dollars -- take actual weapon, cast a mould out of it, use mould to make plastic replicas -- why so much $ ???
if I had access to the metal shop from high school, I could make an aluminum replica in shortly more time than it takes to heat up the small foundry oven to melt a lawn chair! (OK, it might not be the nicest finish, but it would probably work for many applications...)
_________________ what part of "shall not be infringed" is so hard to understand by so many people?
gun control means hitting where you aim!
|
|
|
|
|
BruceGibson
|
Post subject: Posted: Thu Jun 21, 2007 9:55 am |
|
Joined: Thu Apr 26, 2007 4:40 am Posts: 13 Location: Northwest Florida
|
They're costly, but as someone else mentioned, I think it's because they don't sell a lot of them, in the grand scheme.
Give them a call--talk to John Ring. He's a good guy. If you've got your resale number he'll get you fixed up.
_________________ "He who is silent is deemed to consent."
www.GibsonProrodeo.com
|
|
|
|
|
This is a static archive the Twin Cities Carry forum, maintained as a public service by the current forum of record, The Minnesota Carry Forum.
All times are UTC - 6 hours
Users browsing this forum: No registered users and 5 guests |
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum
|